top of page

Autentico Primer Wood & Walls

Price

€ 32,95

Autentico Primer WOOD & WALL is a high-quality, low-VOC (Volatile Organic Compounds) primer and sealer for indoor and outdoor use. To be used as a primer for painting tiles, for sealing rough (unpainted) wood such as mahogany, oak, chestnut or pine or exotic woods to prevent bleeding (reddish stains) or tannin reaction (yellowish stains). As an insulator for surfaces with stains from substances that often recur even after painting, such as smoke, nicotine, coffee or tea. Can also be used as a primer on walls and furniture to equalise the absorption of the product.

Volume

Quantity

Description : Suggestions for use

Description

Autentico Primer WOOD & WALL is a high-quality, low-VOC (Volatile Organic Compounds) primer and sealer for indoor and outdoor use. Use as a primer for painting tiles, for sealing raw (unpainted) wood such as mahogany, oak, chestnut, pine or exotic woods to prevent bleeding (reddish stains) or tannin reaction (yellowish stains). As an insulator for surfaces with stains from substances that often recur even after painting, such as smoke, nicotine, coffee or tea. It can also be used as a primer on walls and furniture to even out the absorption of the product.

Where to use

As a base coat for painting tiles. 

For sealing raw wood to prevent tannin reaction and bleeding.

As a primer on walls to prevent uneven suction (e.g. after repairs) or to isolate nicotine and other stains.

Preparation and application

Mix well before use.

The substrate must be very clean, dry and stable. Remove dust, grease and other impurities very well. For this, we recommend our special Autentico Omniclean soap. When painting over plaster, it is essential to make sure it is scorched.

Apply a coat of Autentico Primer Wood & Wall by brush, roller or airless, diluting the primer with 5% water. 

Coverage

One litre covers approximately 10-13 m2, depending on the surface type and porosity. 

Drying time

After 30 minutes, the product is hand-dry, but allow at least 4 hours drying time. Drying time may vary depending on environmental conditions.

Recommendations

Autentico products should be applied above 10ºC or below 30ºC. They dry very quickly but need several weeks to harden (cure), so we recommend being careful the first few days to avoid unevenness and scratches.

Preparation

bottom of page